2. See Which Buses Stop ThereMost stops have a "Guide-A-Ride." This is a rectangular box displaying route maps and schedules. Local-bus routes are designated by a letter followed by a number. Routes with an "M" prefix operate mainly in Manhattan. "B" is for Brooklyn, "Bx" for the Bronx, "Q" for Queens and "S" for Staten Island. Routes with an "X" prefix are express routes.Some stops serve more than one bus. Look at the Guide-A-Ride to make sure the bus you want will be stopping there. Buses display their route number on the front, and sometimes the back.On some of our heavily used bus routes, we offer limited-stop service in both directions to make the trip faster for more customers. You'll know whether the bus that arrives is making limited stops if you see an orange "Limited" card in the bus window. Limited stops are at major intersections, transfer points, and major attractions, such as Lincoln Center. Locals make all stops.
3. Board the BusWhen the bus with the route number you want arrives, stay on the curb until the bus stops and the front doors open.All our buses can "kneel"; that is, they can tilt down toward the curb to make boarding easier. People unable to walk up the front steps of the bus may board using the wheelchair lift. The bus operator has a key to operate this lift, which is located at the rear of the bus.If you're not sure whether the bus goes where you need to go, ask your bus driver. The driver knows how to get around the city.
4. Pay Your FareThe fare box is directly in front of you as you board the bus. You need the exact fare -- $2.25 in nickels, dimes, and quarters or a subway token. Our bus operators don't make change and fare boxes don't accept dollar bills or pennies. MetroCards, available at subway stations, can also be used to pay your fare on buses. Up to three children can ride buses free when they're accompanied by an adult. (To qualify for a free fare, a child has to be under 44 inches or 111cm tall.)
5. Ask for a Transfer, If You Need OneYou can transfer for free between most buses with intersecting routes. Request a transfer ticket from your driver after you pay your fare. A list of each valid transfer point for your route is on the front of the transfer. When you catch your connecting bus, give the transfer to your driver. Transfers are allowed only to continue your trip in a single direction and are only valid for one hour. They cannot be used for your return trip on the same bus line.
6. Ride SafelyIf there is no seat available, use the grab bars for balance and move to the back of the bus. There's usually more room there. For the safety and convenience of your fellow passengers, we also ask you to keep your packages and personal belongings out of the aisles.
7. Signal the Driver to StopFor the driver to stop the bus where you want to get off, push the tape strip located above and beside the windows. You need to signal your driver about one block before your desired stop. The bus will stop at the route's next stop. Stops are every 2-3 blocks, except for limiteds.
8. Get Off the BusTry to stay in your seat until the bus stops. To keep out of the way of people trying to board, exit through the rear doors. Once the bus stops, you'll see a green light over these doors to indicate that they can be opened. In some buses, these doors open automatically when you press the tape strip located on the doors.